TLP3330 Datasheet, PDF (2/7 Pages) Toshiba Semiconductor – OFF-state output terminal voltage - 20 V (min)

5. Internal Circuit
TLP3330
6. Absolute Maximum Ratings (Note) (Unless otherwise specified, T_a = 25 )
Characteristics
Symbol Note
Rating
Unit
LED Input forward current
I_F
50
mA
Input forward current derating
(T_a ≥ 25 )
∆I_F/∆T_a
-0.5
mA/
Input reverse voltage
V_R
5
V
Input power dissipation
P_D
50
mW
Junction temperature
T_j
125

Detector OFF-state output terminal voltage
V_OFF
20
V
ON-state current
I_ON
160
mA
ON-state current derating
(T_a ≥ 25 )
∆I_ON/∆T_a
-1.6
mA/
ON-state current (pulsed)
(t = 100 ms, Duty = 1/10)
I_ONP
480
mA
Output power dissipation
P_O
200
mW
Junction temperature
T_j
125

Common Storage temperature
T_stg
-40 to 125
Operating temperature
T_opr
-40 to 85
Lead soldering temperature
(10 s)
T_sol
260
Isolation voltage
AC, 1 min, R.H. ≤ 60 %
BV_S (Note 1)
500
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: This device is considered as a two-terminal device: Pins 1 and 2 are shorted together, and pins 3 and 4 are
shorted together.
Caution:This device is sensitive to electrostatic discharge (ESD). Extreme ESD conditions should be guarded against
by using proper antistatic precautions for the worktable, operator, solder iron, soldering equipment and so on.
7. Recommended Operating Conditions (Note)
Characteristics
Symbol Note Min Typ. Max Unit
Supply voltage
V_DD


16
V
Input forward current
I_F
5
7.5
20
mA
ON-state current
I_ON


160
Operating temperature
T_opr
-20

65

Note: The recommended operating conditions are given as a design guide necessary to obtain the intended
performance of the device. Each parameter is an independent value. When creating a system design using
this device, the electrical characteristics specified in this datasheet should also be considered.
2
2013-10-28
Rev.1.0