TLP202A_07 Datasheet, PDF (2/4 Pages) Toshiba Semiconductor – Measurement and Control Equipment

TLP202A
Absolute Maximum Rating (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Forward current
Forward current derating
(Ta ^>= 25°C)
LED Peak forward current
(100 μs pulse, 100 pps)
Reverse voltage
Junction temperature
Off-state output terminal
voltage
On-state current
Detector
Forward current derating
(Ta ^>= 25°C)
Junction temperature
Storage temperature
Operating temperature
Lead soldering temperature (10 s)
Isolation voltage
(AC, 1 min, R.H. ^<= 60%)
(Note 1)
I_F
ΔI_F/°C
I_FP
V_R
T_j
V_OFF
I_ON
ΔI_ON/°C
T_j
T_stg
T_opr
T_sol
BV_S
50
−0.5
1
5
125
60
400
−4.0
125
−55 to 125
−40 to 85
260
mA
mA/°C
A
V
°C
V
mA
mA/°C
°C
°C
°C
°C
1500
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: LED pins are shorted together. Detector pins are also shorted together.
Recommended Operating Conditions
Characteristics
Symbol
Min Typ. Max Unit
Supply voltage
Forward current
On-state current
Operating temperature
V_DD
I_F
I_ON
T_opr
⎯
⎯
48
V
5
7.5
25
mA
⎯
⎯ 400 mA
−20
⎯
65
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2007-10-01