TLP197D Datasheet, PDF (2/6 Pages) Toshiba Semiconductor – Measurement Equipment

TLP197D
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Forward current
Forward current derating
(Ta ^>= 25°C)
Peak forward current
(100 μs pulse, 100 pps)
I_F
ΔI_F/°C
I_FP
50
mA
−0.5
mA/°C
1
A
Reverse voltage
Junction temperature
Off-state output terminal voltage
A connection
On-state current B connection
C connection
V_R
T_j
V_OFF
I_ON
5
V
125
°C
200
V
200
200
mA
400
On-state current
derating
(Ta ^>= 25°C)
A connection
B connection
C connection
ΔI_ON/°C
−2.0
−2.0
mA/°C
−4.0
Junction temperature
T_j
Operating temperature range
T_opr
Storage temperature range
T_stg
Lead soldering temperature (10 s)
T_sol
Isolation voltage
(AC, 1 min, R.H. ^<= 60%)
(Note 1)
BV_S
125
−40 to 85
−55 to 125
260
1500
°C
°C
°C
°C
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Pins 1, 2 and 3 are shorted together, and pins 4, 5 and 6 are shorted together.
Recommended Operating Conditions
Characteristics
Symbol
Min Typ. Max Unit
Supply voltage
V_DD
⎯
⎯ 160
V
Forward current
I_F
5
7.5
25
mA
On-state current
I_ON
⎯
⎯ 130 mA
Operating temperature
T_opr
−20
⎯
60
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Circuit Connections
1
6
2
5
3
4
LOAD
AC
or
DC
A Connection
1
6
2
5
3
4
LOAD
DC
B Connection
2
1
6
2
5
3
4
LOAD
DC
C Connection
2007-10-01