TLP148G Datasheet, PDF (2/6 Pages) Toshiba Semiconductor – Office Machine Household Use Equipment Solid State Relay Switching Power Supply

Absolute Maximum Ratings (Ta = 25°C)
TLP148G
Characteristic
Symbol
Rating
Unit
Forward current
Forward current derating (Ta ≥ 53°C)
Peak forward current (100 μs pulse, 100 pps)
Reverse voltage
Peak forward voltage(R_GK = 27kΩ)
Peak reverse voltage(R_GK = 27kΩ)
On−state current
On−state current derating (Ta ≥ 25°C)
Peak on-state current (100 μs pulse, 120 pps)
Peak one cycle surge current
Peak reverse gate voltage
Operating temperature range
Storage temperature range
Lead soldering temperature (10 s)
Isolation voltage (AC, 1 min., RH ≤ 60%) (Note 1)
I_F
ΔI_F/°C
I_FP
V_R
V_DRM
V_RRM
I_T(RMS)
ΔI_T / °C
I_TP
I_TSM
V_GM
T_opr
T_stg
T_sol
BV_S
50
−0.7
1
5
400
400
150
−2.0
3
2
5
−40 to 100
−55 to 125
260
2500
mA
mA / °C
A
V
V
V
mA
mA / °C
A
A
V
°C
°C
°C
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
(Note 1) Device considered a two terminal device: pins 1 and 3 shorted together and pins 4, 5 and 6 shorted
together.
Recommended Operating Conditions
Characteristic
Symbol
Min Typ. Max Unit
Supply voltage
Forward current
Operating temperature
Gate to cathode resistance
Gate to cathode capacitance
V_AC
I_F
T_opr
R_GK
C_GK
―
― 120 Vac
15
―
25
mA
−25
―
85
°C
―
27
33
kΩ
―
0.01 0.1
μF
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2009-10-20