TLP113TPRF Datasheet, PDF (2/8 Pages) Toshiba Semiconductor – Isolated Line Receiver Simplex / Multiplex Data Transmission

TLP113
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Forward current
Pulse forward current
Peak transient forward
current
Reverse voltage
Output current
Output voltage
Supply voltage
(1 minute maximum)
Output power dissipation
Operating temperature range
Storage temperature range
Lead solder temperature (10s)
Isolation voltage
(AC, 1 min., RH ≤ 60%,
(Note 1)
Symbol
I_F
I_FP
(Note 2)
I_FPT
V_R
I_O
V_O
V_CC
P_O
T_opr
T_stg
T_sol
Note 4)
BV_S
Rating
20
40
1
5
25
7
7
40
−40~85
−55~125
260
2500
Unit
mA
mA
A
V
mA
V
V
mW
°C
°C
°C
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
(Note 1) 50% duty cycle, 1ms pulse width.
(Note 2) Pulse width≤1μs, 300pps.
Recommended Operating Conditions
Characteristic
Input voltage, low level
Input current, high level
Supply voltage**
Fan out
(TTL load, each channel)
Operating temperature
Symbol
Min.
Typ.
Max. Unit
V_FL
I_FH
V_CC
−3
0
1.0
V
13*
16
20
mA
4.5
5
5.5
V
N
―
―
8
―
T_opr
0
―
70
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
* 13mA is a guard banded value which allows for at least 20% CTR degradation.
Initial input current threshold value is 10mA or less.
**This item denotes operating ranges, not meaning of recommended operating conditions.
2
2007-10-01