TLGE260 Datasheet, PDF (2/4 Pages) Toshiba Semiconductor – TOSHIBA LED Lamp InGaAℓP Green Light Emission

TLGE260
Electrical And Optical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Min Typ. Max Unit
Forward voltage
Reverse current
Luminous intensity
Peak emission wavelength
Spectral line half width
Dominant wavelength
V_F
I_F=20mA
I_R
V_R=4V
I_V
I_F=20mA
λ_p
I_F=20mA
∆λ
I_F=20mA
λ_d
I_F=20mA
― 2.27 2.8
V
―
―
50
µA
(Note) 8.5
45
― mcd
―
574
―
nm
―
11
―
nm
―
571
―
nm
(Note): Lamps are classified into the following ranks according to their luminous intensity.
Measurement tolerance for each limit is ±15%.
J: 10-20mcd, K: 18-36mcd, L: 32-64mcd
Precaution
Please be careful of the followings
· Soldering temperature: 260°C max Soldering time: 3 s max
(Soldering portion of lead: Up to 2 mm from the body of the device)
· If the lead is formed, the lead should be formed up to 5 mm from the body of the device without forming stress to
the resin. Soldering should be performed after lead forming.
· This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure
that it will not be affected by this IR light.
2
2002-09-25