S-AV36A Datasheet, PDF (2/5 Pages) Toshiba Semiconductor – RF POWER AMPLIFIER MODULE FM RF POWER AMPLIFIER MODULE FOR 80-W COMMERCIAL VHF RADIO APPLICATIONS

PACKAGE OUTLINE
Unit: mm
⑤
①②③
④
S-AV36A
① RF Input ② V_GG ③ V_DD
④ RF Output ⑤ GROUND(Flange)
JEDEC
JEITA
TOSHIBA
Weight: 35 g
—
—
5-53P
ELECTRICAL CHARACTERISTICS (Tc = 25°C, Z_G = 50Ω)
CHARACTERISTICS
SYMBOL
TEST CONDITION
MIN TYP. MAX UNIT
Frequency Range
f_range
—
134
—
174 MHz
Output Power
P_o
80
—
—
W
Power Gain
Total Efficiency
Input VSWR
G_p
η_T
VSWRin
V_DD = 12.5 V
V_GG = 5 V
Pi = 50 mW
Z_L = 50 Ω
32
—
—
dB
45
—
—
%
—
—
3.0
—
Second Harmonic
2nd HRM
—
—
-25
dB
Third Harmonic
Ruggedness
Stability
3rd HRM
—
—
-30
dB
10.5 V ≤ V_DD ≤ 16.5 V, 0 V ≤ V_GG ≤ V_GGajs
(V_GG = V_GGajs @ Po = 80 W)
—
Pi = 50 mW
No Damage
—
P_o = 80 W (Adjusted via V_GG @ Z_L = 50Ω)
VSWR LOAD 20: 1 ALL PHASE (@ 2 s)
10.5 V ≤ V_DD ≤ 16.5 V, 0 V ≤ V_GG ≤ V_GGajs
(V_GG = V_GGajs @ Po = 80 W)
—
Pi = 50 mW
No spurious output
of -60 dB or greater
—
P_o ≤ 80 W (Adjusted via V_GG @ Z_L = 50Ω)
VSWR LOAD 3: 1 ALL PHASE
Note 5:The output power is intended to follow the rating provided in Figure 1 in Note 2.
Note 6: Stability
Measurements are performed under the conditions where VSWR is at 3:1 through all phases over the whole frequency
range, and they are guaranteed only under those conditions. Even though it is guaranteed to be stable where VSWR is
at 3:1, the VSWR load over the operating frequency should be designed to be 50 Ω .At the same time, ensure that the
VSWR load does not deviate much from 50Ω even for a moment, nor deviate even a little from 50Ω continually. The
S-AU82AL is not intended for such operations, and proper operation under such conditions is not guaranteed due to the
possibilities of heat generation in the module and its applications.
2
2007-06-21