S-AV35A Datasheet, PDF (2/5 Pages) Toshiba Semiconductor – RF POWER AMPLIFIER MODULE FM RF POWER AMPLIFIER MODULE FOR 32-W COMMERCIAL VHF RADIO APPLICATIONS

PACKAGE OUTLINE
Unit: mm
S-AV35A
① RF Input ② V_GG ③ V_DD
④ RF Outout ⑤ GROUND(FRANGE)
JEDEC
JEITA
TOSHIBA
Weight: 35g
—
—
5-32G
ELECTRICAL CHARACTERISTICS (Tc = 25℃, Z_G = 50Ω)
CHARACTERISTICS
SYMBOL
TEST CONDITION
MIN TYP. MAX UNIT
Frequency Range
f_range
—
154 — 162 MHz
Output Power1
P_o1
32 — —
W
Power Gain1
Total Efficiency
Input VSWR
G_p1
η_T
VSWRin
V_DD = 12.5 V
V_GG = 5 V
Pi = 10 mW
Z_L = 50 Ω
35 — —
dB
50 — —
%
—
— 3.0
—
Second Harmonic
2nd HRM
— — -30 dB
Third Harmonic
3rd HRM
— — -30 dB
Output Power2
Power Gain2
Ruggedness
Stability
P_o2
V_DD = 10.5V、V_GG = 5V
G_p2
Pi = 10mW、Z_L = 50Ω
20 — —
W
33 — —
dB
10.5 V ≤ V_DD ≤ 16.5 V, 0 V ≤ V_GG ≤ V_GGajs
(V_GG = V_GGajs @ Po = 32 W)
—
Pi = 10 mW
No Damage
—
P_o = 32 W (Adjusted via V_GG @ Z_L = 50Ω)
VSWR LOAD 20: 1 ALL PHASE (@ 2 s)
10.5 V ≤ V_DD ≤ 16.5 V, 0 V ≤ V_GG ≤ V_GGajs
(V_GG = V_GGajs @ Po = 32W)
—
Pi = 10 mW
No spurious output
of -60 dB or greater
—
P_o ≤ 32 W (Adjusted via V_GG @ Z_L = 50Ω)
VSWR LOAD 3: 1 ALL PHASE
Note 5:The output power is intended to follow the rating provided in Figure 1 in Note 2.
Note 6: Stability
Measurements are performed under the conditions where VSWR is at 3:1 through all phases over the whole frequency
range, and they are guaranteed only under those conditions. Even though it is guaranteed to be stable where VSWR is
at 3:1, the VSWR load over the operating frequency should be designed to be 50 Ω .At the same time, ensure that the
2
2007-06-21