English
Language : 

S-AU83L Datasheet, PDF (2/4 Pages) Toshiba Semiconductor – FM RF POWER AMPLIFIER MODULE for UHF BAND
S-AU83L
ELECTRICAL CHARACTERISTICS (Tc = 25℃, ZG = 50Ω)
CHARACTERISTIC
Frequency Range
Total Current ( DC operation )
Output Power
Power Gain
Total Efficiency
Input VSWR
Second Harmonic
Third Harmonic
Load Mismatch
Stability
SYMBOL
frange
IT
Po
Gp
ηT
VSWRin
2nd HRM
3rd HRM
—
—
TEST CONDITION
—
VDD = 12.5V, VGG = 5V, Pi = 0mW
ZL = 50Ω
VDD = 12.5V
VGG = 5V
Pi = 50mW
ZL = 50Ω
VDD = 10.5 to 16.5V, VGG = 0 to 5V
Pi = 50mW
Po = 32W (VGG = adjust,@ ZL = 50Ω)
VSWR LOAD 20: 1 ALL PHASE (@2s)
VDD = 10.5 to 16.5V, VGG = 0 to 5V
Pi = 50mW
Po ≦ 32W (VGG = adjust,@ ZL = 50Ω)
VSWR LOAD 3: 1 ALL PHASE
MIN. TYP. MAX. UNIT
400 — 470 MHz
—
—
10
A
32
—
—
W
28.0 —
—
dB
40
—
—
%
—
—
3.0
—
—
—
-30
dB
—
—
-30
dB
No Degradation
—
All spurious output
than 60dB below
—
desired signal
Caution
ï½¥ This product has intersetting cap. Please pay attention for exceeding stress and foreign matter in your application.
And not to take away the cap.
ï½¥ Do not break, cut, crush or dissolve chemically. Dispose of this product properly according to law.
Do not intermingle with normal industrial or domestic waste.
ï½¥ This product is electrostatic sensitivity, please handle with caution.
ï½¥ This product is flowed high current for a VDD terminal at both RF ON and RF OFF. And it has large calorific value
for high output poer. So please use it within the limit of the maximum rating.
The view of the maximum rating of our company,
"The absolute maximum ratings are rated values which must not be exceeded during operatin,
even for an instant. And it guarantees each item independently. When two items or more of
maximum rated items joins a device at once. It becomes the outside of a guarantee. "
2
2004-01-06