TMP86F809NG Datasheet, PDF (157/200 Pages) Toshiba Semiconductor – 8 Bit Microcontroller

TMP86F809NG
GND
TMP86F809NG
VDD
TEST
XIN
XOUT
VSS
BOOT / RXD0 (P02)
TXD0 (P03)
RESET
VDD(4.5 V to 5.5 V)
Serial PROM mode
MCU mode
pull-up
External control
Figure 15-2 Serial PROM Mode Pin Setting
Note 1: For connection of other pins, refer to " Table 15-3 Pin Function in the Serial PROM Mode ".
15.3.3 Example Connection for On-Board Writing
Figure 15-3 shows an example connection to perform on-board wring.
VDD
TEST
BOOT / RXD0 (P02)
TXD0 (P03)
RESET
XIN
XOUT
VSS
Serial PROM mode
MCU mode
Other
parts
(Note 1)
(Note 2)
RESET
control
VDD(4.5 V to 5.5 V)
Pull-up
Level
converter
PC control
RC power-on
reset circuit
GND
Application board
External control board
Figure 15-3 Example Connection for On-Board Writing
Note 1: When other parts on the application board effect the UART communication in the serial PROM mode, iso-
late these pins by a jumper or switch.
Note 2: When the reset control circuit on the application board effects activation of the serial PROM mode, isolate
the pin by a jumper or switch.
Note 3: For connection of other pins, refer to " Table 15-3 Pin Function in the Serial PROM Mode ".
Page 147