TLP2398 Datasheet, PDF (15/18 Pages) Toshiba Semiconductor – Photocouplers GaA-As Infrared LED and Photo IC

TLP2398
Fig. 16.2 Insulation Related Specifications (Note)
Note:
Note:
If a printed circuit is incorporated, the creepage distance and clearance may be reduced below this value. (e.
g., at a standard distance between soldering eye centers of 6.3 mm). If this is not permissible, the user shall
take suitable measures.
This photocoupler is suitable for safe electrical isolation only within the safety limit data.
Maintenance of the safety data shall be ensured by means of protective circuits.
Fig. 16.3 Marking Example (Note)
Note: The above marking is applied to the photocouplers that have been qualified according to option (V4) of EN60747.
©2016 Toshiba Corporation
15
2016-01-19
Rev.6.0