English
Language : 

VNL08C351-INV Datasheet, PDF (1/4 Pages) Toshiba Semiconductor – DISPLAY TECHNOLOGY
TOSHIBA MATSUSHITA DISPLAY TECHNOLOGY
PRODUCT INFORMATION
INVERTER for LTM08C351
VNL08C351-INV
All information is subject to change without notice. Please read bottom notes.
TENTATIVE
MECHANICAL SPECIFICATIONS
Item
Dimensional Outline (Typ.)
Applicable TFT Module
Weight (approximately)
Specifications
110.0(W) x 22.0(H) x 10.0(Max.)(D) mm
LTM08C351(8.4 Type SVGA)
25g(Typ.)
ABSOLUTE MAXIMUM RATINGS *1
Item
Symbol
Min.
Supply Voltage
VIN
0
Input Voltage
VON/VOFF
-1
Operating Temperature *2
Tstg
0
Storage Temperature *2
Top
-20
Storage Humidity *2
H
10
Max.
14.0
VIN+1
50
60
90
*1 : Do not exceed the maximum rating values under the worst probable conditions
taking into account the supply voltage variation, input voltage variation,
variation in part constants, ambient temperature and so on.
Otherwise the inverter unit may be damaged.
*2 : Wet bulb temperature should be 39°C max.,and no condensation of water.
Unit
V
kHz
°C
°C
%(RH)
ELECTRICAL SPECIFICATION *3
Item
Symbol
Min.
Typ.
Max.
Unit
Supply Voltage
Input Current
Open Output Voltage
Frequency
Output Current *4
Volume Max.
Volume Min.
VIN
IIN
VOPEN
f
IFL
10.8
---
1400
40
---
---
12.0
550
---
45
12.0
5.5
13.2
V
900
mA
---
Vo-p
50
kHz
---
mA(rms)
---
mA(rms)
V ON/OFF Signal Voltage
VON
2.5
---
VIN
V
VOFF
---
---
0.7
V
*3 : The characteristics without remarks are measured on condition with Vin=12V and VR-VR:short.
*4 : This is the sum of two output currents.
*The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
Toshiba Matsushita Display Technology or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of Toshiba Matsushita Display Technology or others.
*The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba Matsushita
Display Technology before proceeding with the design of equipment incorporating this product.
(1/4)
2003-02-07 (Ver.2.0)