TPS853_07 Datasheet, PDF (1/12 Pages) Toshiba Semiconductor – Mobile Phones, PHS Notebook PCs, PDAs Video cameras, Digital Still Cameras Other Equipment Requiring Luminosity Adjustment

TOSHIBA Photo-IC Silicon Epitaxial Planar
TPS853
TPS853
Mobile Phones, PHS
Notebook PCs, PDAs
Video cameras, Digital Still Cameras
Other Equipment Requiring Luminosity Adjustment
The TPS853 is an ultra-compact surface-mount photo-IC for
illuminance sensors which incorporates a photodiode and current amp
circuit in a single chip.
TOSHIBA
―
The sensitivity is superior to that of a phototransistor, and exhibits
little variation.
Weight: 0.0054 g (typ.)
It has spectral sensitivity closer to luminous efficiency and excellent output linearity.
This photo-IC can be used as the power-saving control for domestic appliances or for backlighting for displays in
cellular phones.
This device includes stand-by function which can reduce the power consumption of the system.
• Ultra-compact and light surface-mount package: 2.0 × 2.1 × 0.7 mm
• Excellent output linearity of illuminance
• Little fluctuation in light current and high level of sensitivity
: I_L = 37 μA to 74 μA @E_V = 100 lx using fluorescent light
: Light current variation width: ×1.67 (when light current classification is specified.)
: Little temperature fluctuation in light current
• Built-in luminous-efficiency correction function, reduced sensitivity variations due to various light sources
: I_L (using incandescent light)/I_L (using fluorescent light) = 1.2 (typ.)
• Low supply voltage, making device suitable for battery-powered equipment: V_CC = 2.2 V to 5.5 V
• Lead(Pb)-Free
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Supply voltage
Output voltage
Stand-by voltage
Light current
Permissible power dissipation
V_CC
V_OUT
V_stb
I_L
P
−0.5 to 7
V
<= _VCC
V
<= _VCC
V
5
mA
35
mW
Operating temperature range
T_opr
Storage temperature range
T_stg
Soldering temperature range (Note 1)
T_sol
−30 to 85
°C
−40 to 100
°C
260
°C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: The reflow time and the recommended temperature profile are shown in the section entitled Handling
Precautions.
Operating Ranges
Characteristics
Supply voltage
Stand-by voltage
Symbol
V_CC
Vstb
Min Typ. Max Unit
2.2
⎯
5.5
V
2.2
⎯
V_CC
V
1
2007-10-01