TPD4135K Datasheet, PDF (1/23 Pages) Toshiba Semiconductor – TOSHIBA Intelligent Power Device High Voltage Monolithic Silicon Power IC

TOSHIBA Intelligent Power Device
High Voltage Monolithic Silicon Power IC
TPD4135K
TPD4135K
The TPD4135K is a DC brush less motor driver using high
voltage PWM control. It is fabricated by high voltage SOI process.
It is three-shunt resistor circuit for current sensing. It contains
level shift high-side driver, low-side driver, IGBT outputs, FRDs
and protective functions for over-current circuit and under
voltage protection circuits and thermal shutdown circuit. It is
easy to control a DC brush less motor by just putting logic inputs
from a MPU or motor controller to the TPD4135K.
HDIP26-P-1332-2.00
Weight : 3.8 g (typ.)
Features
• High voltage power side and low voltage signal side terminal are separated.
• It is the best for current sensing in three shunt resistance.
• Bootstrap circuit gives simple high-side supply.
• Bootstrap diodes are built in.
• A dead time can be set as a minimum of 1.4 μs, and it is the best for a Sine-wave from drive.
• 3-phase bridge output using IGBTs.
• FRDs are built in.
• Included over-current and under-voltage protection, and thermal shutdown.
• The regulator of 7V (typ.) is built in.
• Package: 26-pin DIP.
This product has a MOS structure and is sensitive to electrostatic discharge. When handling this product, ensure that
the environment is protected against electrostatic discharge.
1
2010-09-27