|
TPD4125K Datasheet, PDF (1/23 Pages) Toshiba Semiconductor – Intelligent Power Device High Voltage Monolithic Silicon Power IC | |||
|
TOSHIBA Intelligent Power Device
High Voltage Monolithic Silicon Power IC
TPD4125K
TPD4125K
The TPD4125K is a DC brush less motor driver using high
voltage PWM control. It is fabricated by high voltage SOI process.
It is three-shunt resistor circuit for current sensing. It contains
level shift high-side driver, low-side driver, IGBT outputs, FRDs
and protective functions for under voltage protection circuits and
thermal shutdown circuit. It is easy to control a DC brush less
motor by just putting logic inputs from a MPU or motor controller
to the TPD4125K.
HDIP26-P-1332-2.00
Weight : 3.8 g (typ.)
Features
⢠High voltage power side and low voltage signal side terminal are separated.
⢠It is the best for current sensing in three shunt resistance.
⢠Bootstrap circuit gives simple high-side supply.
⢠Bootstrap diodes are built in.
⢠A dead time can be set as a minimum of 1.4 μs, and it is the best for a Sine-wave from drive.
⢠3-phase bridge output using IGBTs.
⢠FRDs are built in.
⢠Included over-current and under-voltage protection, and thermal shutdown.
⢠The regulator of 7V (typ.) is built in.
⢠Package: 26-pin DIP.
This product has a MOS structure and is sensitive to electrostatic discharge. When handling this product, ensure that
the environment is protected against electrostatic discharge.
1
2008-05-13
|
▷ |