TPD4113K_07 Datasheet, PDF (1/24 Pages) Toshiba Semiconductor – High Voltage Monolithic Silicon Power IC

TPD4113K
TOSHIBA Intelligent Power Device High Voltage Monolithic Silicon Power IC
TPD4113K
The TPD4113K is a DC brushless motor driver using
high- voltage PWM control. It is fabricated using a high-voltage
SOI process. The device contains a level shift high side driver,
low side driver, IGBT outputs, FRDs and protective functions for
over-current and under-voltage protection circuits, and a thermal
shutdown circuit. It is easy to control a DC brush less motor by
just putting logic inputs from a MPU or motor controller to the
TPD4113K.
Features
• Bootstrap circuit gives simple high-side supply.
• Bootstrap diodes are built in.
• A dead time can be set as a minimum of 1.4 μs and it is the
best for a Sine-wave from drive.
• 3-phase bridge output using IGBTs
• FRDs are built in
• Included over-current and under-voltage protection, and
thermal shutdown
• The regulator of 7V (typ.) is built in.
• Package: 23-pin HZIP
This product has a MOS structure and is sensitive to electrostatic
discharge. When handling this product, ensure that the environment
is protected against electrostatic discharge.
Weight
HZIP23-P-1.27F : 6.1 g (typ.)
HZIP23-P-1.27G : 6.1 g (typ.)
HZIP23-P-1.27H : 6.1 g (typ.)
1
2006-11-01