TPD1036F Datasheet, PDF (1/9 Pages) Toshiba Semiconductor – 2-IN-1 Low-Side Power Switch for Motor, Solenoid and Lamp Drivers

TPD1036F
Toshiba Intelligent Power Device Silicon Monolithic Power MOS Integrated Circuit
TPD1036F
2-IN-1 Low-Side Power Switch for Motor, Solenoid and Lamp Drivers
The TPD1036F is a 2-IN-1 low-side switch.
The output has a vertical MOSFET, and the input can be directly
driven from CMOS or TTL logic (e.g., an MPU). The IC provides
intelligent protection functions.
Features
• Two built-in power IC chips with a structure that incorporates
a control block and a vertical power MOSFET on each chip.
• Can be directly driven from a microprocessor, a CMOS logic
IC, etc.
Weight: 0.08 g (typ.)
• Overvoltage (active clamp), overtemperature (thermal
shutdown), and overcurrent (current limiter) protections are built in.
• Low ON-resistance: R_{DS (ON)} = 0.5 Ω (max) (@V_IN = 5 V, I_D = 0.7 A, T_ch = 25°C)
• Low drain cut-off current: I_DSS = 10 μA (max) (@V_IN = 0 V, V_DS = 30 V, T_ch = 25°C)
• Low input current: I_IN = 300 μA (max) (@V_IN = 5 V, T_ch = -40 to 110°C)
• Housed in the 8-pin SOP package and supplied in embossed carrier tape.
Pin Assignment (top view)
Marking
SOURCE1 1
IN1 2
SOURCE2 3
IN2 4
8 DRAIN1
7 DRAIN1
6 DRAIN2
5 DRAIN2
TPD1036
F
Part No. (or abbreviation code)
Lot No.
A line indicates
Lead (Pb) -Free Finish
Note: This product has a MOS structure and is sensitive to electrostatic discharge.
1
2008-09-12