TPD1018F_07 Datasheet, PDF (1/8 Pages) Toshiba Semiconductor – High-side Power Switch for Motors, Solenoids, and Lamp Drivers

TPD1018F
TOSHIBA Intelligent Power Device Silicon Monolithic Power MOS Integrated Circuit
TPD1018F
High-side Power Switch for Motors, Solenoids, and Lamp Drivers
The TPD1018F is a monolithic power IC for high-side switches. The IC
has a vertical MOS FET output that can be directly driven from a CMOS
or TTL logic circuit (e.g., an MPU). The device is equipped with intelligent
self-protection and diagnostic functions.
Features
z A monolithic power IC with a new structure combining a control block
(Bi-CMOS) and a vertical power MOS FET (π-MOS) on a single chip
z One side of load can be grounded to a high-side switch
z Can directly drive a power load from a microprocessor.
z Built-in protection against overvoltage, thermal shutdown, and load
short-circuiting
z Incorporates a diagnosis function that allows diagnosis output to be
read externally in the event of load short-circuiting, overvoltage, or
overheating.
Weight: 0.08g (typ.)
z Low on-resistance
: R_{DS (ON)} = 0.8Ω (max)
z Low operating current : I_DD = 120μA (typ.) (@V_DD = 13.2V, V_IN = 0V)
z 10-pin SSOP package for surface mounting
Block Diagram
Pin Assignment (top view)
Note: Due to its MOS structure, this product is sensitive to static electricity.
Marking
1018
Part No. (or abbreviation code)
Lot No.
A dot indicates
lead (Pb)-free package or
lead (Pb)-free finish.
1
2006-10-31