TMP88PS38B Datasheet, PDF (1/20 Pages) Toshiba Semiconductor – CMOS 8-Bit Microcontroller

TMP88PS38B
CMOS 8-Bit Microcontroller
TMP88PS38BNG/FG
The TMP88PS38B is the high-speed and high performance 8-bit signal chip microcomputers
which built in a program storage area (64 Kbytes), an OSD font storage area (24 Kbytes) and the
one-time PROM of vector table storage area (256 bytes). The TMP88PS38B is pin compatible with
the TMP88CS38B. The operation possible with the TMP88PS38B can be performed by writing
programs to PROM. The TMP88PS38B can write and verify in the same way as the TC571000D an
EPROM programmer.
Product No.
TMP88PS38BNG
TMP88PS38BFG
OTP
64 Kbytes (256 bytes)
24 Kbytes
RAM
2 Kbytes
Package
SDIP42-P-600-1.78
P-QFP44-1414-0.80K
Adaptor Socket
BM11174A
BM11175A
.
030619EBP1
• The information contained herein is subject to change without notice.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of TOSHIBA or others.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer,
when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid
situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to
property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most
recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for
Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunctionor
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made
at the customer’s own risk.
• The products described in this document are subject to the foreign exchange and foreign trade laws.
• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law
and regulations.
• For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality
and Reliability Assurance/Handling Precautions.
Purchase of TOSHIBA I²C components conveys a license under the Philips I²C Patent Rights to use
these components in an I²C system, provided that the system conforms to the I²C Standard
Specification as defined by Philips.
88PS38B-1
2005-05-18