TMP88CH40 Datasheet, PDF (1/4 Pages) Toshiba Semiconductor – CMOS 8-Bit Microcontroller

Under Development
CMOS 8-Bit Microcontroller
TMP88CH40N/M
TMP88CH40
The TMP88CH40N/M are the high-speed and high-function 8-bit single-chip microcomputer which
incorporates the TLCS-870/X Series CPU core, as well as a sine wave drive PMD (Programmable Motor
Driver), a 10-bit AD converter, multi-function Timer/Counters, and synchronous/asynchronous serial
interfaces.
Product Type
Name
TMP88CH40N
TMP88CH40M
ROM
16 Kbytes
RAM
512 + 128 bytes
Package
P-SDIP28-400-1.78
P-SOP28-450-1.27
OTP
TMP88PH40N
TMP88PH40M
Features
♦ 8-bit single-chip microcomputer: TLCS-870/X Series
♦ Minimum instruction execution time: 0.20 µs (at 20.0 MHz
operation)
♦ Fundamental machine instruction: 181 kinds, 842 instructions
♦ I/O port: 19 pins
• Large-current output: 14 pins (typ. 20 mA), capable of LED
direct drive
♦ Watchdog Timer (WDT)
♦ Time Base Timer (TBT)
♦ Programmable motor driver: 1 channel (PMD2)
• Sine wave drive circuit (RAM for sine wave data is
incorporated.)
• Rotor position detection function
• Timer and capture function for montor controlling
• Overload protective function
• Start functions for automatic commutation and automatic
position detection
P-SDIP28-400-1.78
TMP88CH40N
P-SOP28-450-1.27
-0.80D
TMP88CH40M
000707EBP1
• For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality
and Reliability Assurance / Handling Precautions.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling
Guide for Semiconductor Devices, ” or “TOSHIBA Semiconductor Reliability Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer’s own risk.
• The products described in this document are subject to the foreign exchange and foreign trade laws.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or
others.
• The information contained herein is subject to change without notice.
1
2002-02-05