TLRMHGH48T Datasheet, PDF (1/3 Pages) Toshiba Semiconductor – BI-COLOR HIGH LUMINOSITY INDICATOR

TLRMHGH48T(F)
TOSHIBA LED Lamp InGaAlP Red/Green Light Emission
TLRMHGH48T(F)
○ BI-COLOR HIGH LUMINOSITY INDICATOR
• Lead(Pb) free(Sn-Ag-Cu)
• High Luminous Intensity.
• 5mm package
• InGaAlP Red/Green LED, the cathode is common to two colors.
• All plastic mold type.
• Transparent Lens.
Absolute Maximum Ratings (Ta = 25°C)
Unit: mm
CHARACTERISTICS
FORWARD CURRENT
SYMBOL
I_F
RATING
50 (Note)
UNIT
mA
Stopper
REVERSE VOLTAGE
V_R
4
V
POWER DISSIPATION
T_opr
−40~100
°C
OPERATING TEMPERATURE
T_stg
−40~120
°C
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual
reliability data (i.e. reliability test report and estimated failure rate,
etc).
JEDEC
JEITA
TOSHIBA
Anode(Red)
Common Cathode
Anode(Green)
―
―
4-5AR1
Note: Maximum rating of “forward current – atmospheric
temperature (i.e. IF-Ta graph in the next page)” is for each
Weight: 0.37 g (typ.)
component.
In case two components lightening, total current should be within the rating.
PRECAUTIONS
Please be careful of the followings
• Soldering temperature : 260 max Soldering time :3 s max (Soldering portion of lead : below the lead stopper of
the device)
• If the lead is formed, the lead should be formed up to below the lead stopper of the device without Formed stress
to the resin. Soldering should be performed after lead forming.
• The visible LED lamp also emits some IR light.
If a photodetector is located near the LED lamp, please ensure that it will not be affected by the IR light.
ELECTRICAL AND OPTICAL CHARACTERISTICS (Ta = 25°C)
CHARACTERISTICS
SYMBOL TEST CONDITION
MIN
Red
⎯
FORWARD VOLTAGE
V_F
I_F = 20mA
Green
⎯
Red
⎯
REVERSE CURRENT
I_R
V_R = 4V
Green
⎯
Red
476
LUMINOUS INTENSITY
I_V
I_F = 20mA
Green
272
Red
⎯
SPECTRAL LINE HALF WIDTH
Green
Δλ
I_F = 20mA
⎯
Red
⎯
DOMINANT WAVELENGTH
λd
I_F = 20mA
Green
⎯
TYP
1.95
2.05
⎯
⎯
1100
500
13
13
626
571
MAX
2.4
2.4
50
50
⎯
⎯
⎯
⎯
⎯
⎯
UNIT
V
uA
mcd
nm
nm
1
2007-10-01