|
TLP833_07 Datasheet, PDF (1/8 Pages) Toshiba Semiconductor – Copiers, Printers, Fax Machines | |||
|
TOSHIBA Photointerrupter Infrared LED + Phototransistor
TLP833(F)
TLP833(F)
Lead(Pb)-Free
Copiers, Printers, Fax Machines
VCRS, Microwave Ovens, Air
Conditioners
Automatic Vending Machines
Various Position Detection Sensors
The TLP833(F) is a photointerrupter which
incorporates a high radiant power GaAs LED and a
fastâresponse Si phototransistor. The package has
a deep gap.
⢠Package with deep gap (gap: 12 mm)
⢠Designed for direct mounting on printed circuit
boards (positioning pins included).
⢠Gap: 5mm
⢠Resolution: Slit width 0.5mm
⢠High current transfer ratio: IC/IF = 5% (min)
⢠High temperature operation: Topr = 95°C (max)
⢠Package material: Polybutylene terephthalate
(UL94âVâ0)
⢠Detector impermeable to visible light
TOSHIBA
Weight: 1g (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Forward current
Forward current 25°C < Ta ⦠85°C
derating
Ta > 85°C
IF
ÎIF/°C
50
â0.33
â2
mA
mA/°C
Reverse voltage
VR
5
V
Collectorâemitter voltage
VCEO
35
V
Emitterâcollector voltage
VECO
5
V
Collector power dissipation
PC
75
mW
Collector power dissipation derating
(Ta > 25°C)
ÎPC/°C
â1
mW/°C
Collector current
Operating temperature range
Storage temperature range
Soldering temperature (5 s)
IC
50
mA
Topr
â30~85
°C
Tstg
â40~100
°C
Tsol
260
°C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(âHandling Precautionsâ/âDerating Concept and Methodsâ) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
1
2007-10-01
|
▷ |