TLP797J Datasheet, PDF (1/2 Pages) Toshiba Semiconductor – TELECOMMUNICATION MEASUREMENT EQUIPMENT FA

TOSHIBA Photocoupler Photo Relay
TLP797J
Telecommunication
Measurement Instrumenation
FA
TLP797J
Unit: mm
The TOSHIBA TLP797J consists of an aluminum gallium arsenide
infrared emitting diode optically coupled to a photo-MOS FET in a six lead
plastic DIP package (DIP6).
The TLP797J is a bi-directional switch can replace mechanical relays in
many applications.
• 6 pin DIP (DIP6)
• 1-form-A
• Peak off-state voltage: 600 V (min)
• Trigger LED current: 5 mA (max)
• On-state current: 100 mA (max)
• On-state resistance: 35 Ω (max)
• Isolation voltage: 5000 Vrms (min)
• UL recognized: UL1577, file No. E67349
• Option(D4) type
VDE approved: DIN EN 60747-5-2
Certificate No. 40009302
Maximum operating insulation voltage: 890 Vpk
Maximum permissible over voltage: 6000 Vpk
Note: When ordering an EN60747-5-2 approved device,
"Option (D4)" should be designated.
JEDEC
⎯
JEITA
⎯
TOSHIBA
11-7A8
Weight: 0.4 g (typ.)
• Construction mechanical rating
7.62 mm pitch
standard type
10.16 mm pitch
TLPXXXF type
Creepage distance
Clearance
Insulation thickness
7.0 mm (min)
7.0 mm (min)
0.4 mm (min)
8.0 mm (min)
8.0 mm (min)
0.4 mm (min)
Note: When applying safety standard certification,
use the standard part number, e.g., TLP797J.
Schematic
Pin Configurations (top view)
1
6
1: Anode
2: Cathode
2
5
3: N.C.
4: Drain D1
5: Source
3
4
6: Drain D2
Start of commercial production
2001/07
1
2014-09-22