TLP751 Datasheet, PDF (1/7 Pages) Toshiba Semiconductor – Digital Logic Ground Isolation Line Receiver Microprocessor System Interfaces Switching Power Supply Feedback Control Analog Signal Isolation

TOSHIBA Photocoupler GaAℓAs Ired + Photo IC
TLP751
Digital Logic Ground Isolation
Line Receiver
Microprocessor System Interfaces
Switching Power Supply Feedback Control
Analog Signal Isolation
TLP751
Unit in mm
The TOSHIBA TLP751 consists of GaAℓAs high−output light
emitting diode and a high speed detector of one chip photo diode−
transistor. This unit is 8−lead DIP.
TLP751 has internal base connection. This base pin should be used for
analog application or enable operation. If base pin is open, output signal
will be noisy by environmental condition. For this case, TLP750 is
suitable.
· Switching speed: tpHL = 0.3µs (typ.)
tpLH = 0.5µs (typ.)(RL=1.9kΩ)
· TTL compatible
· UL recognized: UL1577, file no. E67349
· BSI approved: BS EN60065: 1994,
Certificate no. 7613
BS EN60950: 1992,
Certificate no. 7614
· Isolation voltage: 5000Vrms(min.)
· Option(D4)type
VDE approved: DIN VDE0884 / 06.92,
Certificate no. 68384
Maximum operating insulation voltage: 890VPK
Highest permissible over voltage: 8000VPK
(Note) When a VDE0884 approved type is needed,
please designate the “Option(D4)”
· Creepage distance: 6.4mm(min.)
Clearance: 6.4mm(min.)
Insulation thickness: 0.4mm(min.)
TOSHIBA
Weight: 0.54g
11−10C4
Pin Configuration(top view)
Schematic
1
2002-09-25