TLP719F Datasheet, PDF (1/2 Pages) Toshiba Semiconductor – Digital logic ground isolation

TOSHIBA PHOTOCOUPLER GaAℓAs IRED + PHOTO−IC
TLP719F
TLP719F
Digital logic ground isolation
Line receivers
Microprocessor system interfaces
Switching power supply feedback control
Transistor invertors
4.58±0.25
654
Unit in mm
The TOSHIBA TLP719F consists of a GaAℓAs high-output light-emitting diode
and a high-speed detector.
This unit is a 6-lead SDIP. The TLP719F is 50% smaller than the 8-pin DIP
and meets the reinforced insulation class requirements of international safety
standards. Therefore the mounting area can be reduced in equipment
requiring safety standard certification.
The TLP719F has a Faraday shield integrated on the photodetector chip to
provide an effective common mode noise transient immunity. Therefore this
product is suitable for application in noisy environmental conditions.
Absolute maximum ratings and electrical characteristics are the same as the
TLP719 technical data sheets.
123
7.62±0.25
1.27±0.2
0.4±0.1
0.75±0.25
11.7±0.3
TOSHIBA
11-5J101
Weight：0.26 g (t yp .)
11-5J101
• Open collector
• Package type
• Isolation voltage
• Common mode transient immunity
• Switching speed
• TTL compatible
• Construction mechanical rating
: SDIP6
: 5000 Vrms (min)
: ±10 kV/us(min) @V_CM = 400 V
: t_pHL/ t_pLH = 0.8 μs (max)
@ I_F = 16 mA , V_CC
R_L = 1.9 kΩ , Ta = 25 °C
Creepage Distance
Clearance
8.0 mm (min)
8.0 mm (min)
Pin Configuration (top view)
Insulation Thickness
0.4 mm (min)
• UL recognized
: UL1577, File No. E67349
• Option (D4)
TÜV approved
: EN60747-5-2
Certificate No. R50033433
Maximum operating insulation voltage : 1140 Vpk
1
2
3
SHIELD
6 ^{1: ANODE}
2: N.C.
3: CATHODE
5 _{4: EMITTER (GND)}
5: COLLECTOR (OUTPUT)
4 _{6: VCC}
Highest permissible over voltage
: 8000 Vpk
( Note ) When an EN60747-5-2 approved type is needed,
please designate the “Option(D4)”
Schematic
I_F
1
V_F
I_CC
I_O
6 ^VCC
5 ^VO
3
SHIELD
GND
4
A 0.1-μF bypass capacitor must be
connected between pins 4 and 6.
(See Note 7.)
1
2007-10-01