TLP714 Datasheet, PDF (1/15 Pages) Toshiba Semiconductor – Inverter logic type (open collector output)

Photocouplers GaAℓAs Infrared LED & Photo IC
TLP714
TLP714
1. Applications
• Intelligent Power Module Signal Isolation
• Factory Automation (FA)
• Industrial Inverters
2. General
The TLP714 is a photocoupler in a 6-pin SDIP package that consists of a GaAℓAs infrared light-emitting diode
(LED) optically coupled to an integrated high-gain, high-speed photodetector IC chip. It provides guaranteed
performance and specifications at temperatures up to 125 .The TLP714 is physically smaller than the one in
an 8-pin DIP package and compliant with international safety standards for reinforced insulation. It thus provides
a smaller footprint solution for applications that require safety standard certification. An internal noise shield
provides a guaranteed commonmode transient immunity of ±20 kV/µs. The TLP714 guarantees minimum and
maximum of propagation delay time, pulse width distortion. Therefore it is suitable for isolation interface between
IPM and control IC circuits in motor control application.
3. Features
(1) Inverter logic type (open collector output)
(2) Package: SDIP6
(3) Operating temperature: -40 to 125 
(4) Supply voltage: -0.5 to 30 V
(5) Threshold input current: 5.0 mA (max)
(6) Supply current: 1.3 mA (max)
(7) Propagation delay time: t_pHL = 400 ns (max), t_pLH = 550 ns (max)
(8) Pulse width distortion: 400 ns (max)
(9) Common-mode transient immunity: ±20 kV/µs (min)
(10) Isolation voltage: 5000 Vrms (min)
(11) Safety standards
UL-approved: UL1577, File No.E67349
cUL-approved: CSA Component Acceptance Service No.5A File No.E67349
VDE-approved: EN60747-5-5 (Note 1)
Note 1: When an EN60747-5-5 approved type is needed, please designate the Option (D4).
©2015 Toshiba Corporation
1
Start of commercial production
2011-09
2015-12-25
Rev.6.0