TLP220D Datasheet, PDF (1/8 Pages) Toshiba Semiconductor – Normally open (1-Form-A)

Photocouplers Photorelay
TLP220D
TLP220D
1. Applications
• Mechanical relay replacements
• Security Systems
• Measuring Instruments
• Factory Automation (FA)
• Amusement Equipment
• Smart Meters
• Electricity Meters
2. General
The TLP220D photorelay consists of a photo MOSFET optically coupled to an infrared light emitting diode. It is
housed in a 4-pin DIP package. It provides an isolation voltage of 5000 Vrms, making it suitable for applications
that require reinforced insulation.
3. Features
(1) Normally open (1-Form-A)
(2) OFF-state output terminal voltage: 200 V (min)
(3) Trigger LED current: 2 mA (max)
(4) ON-state current: 250 mA (max)
(5) ON-state resistance: 8 Ω (max)
(6) Isolation voltage: 5000 Vrms (min)
(7) Safety standards
UL-approved: UL1577 File No. E67349
cUL-approved: CSA Component Acceptance Service No. 5A, File No. E67349
VDE-approved: Option (D4) EN60747-5-5 (Note)
Note: When an EN60747-5-5 approved type is needed, please designate the Option (D4)
4. Packaging and Pin Configuration
1: Anode
2: Cathode
3: Drain
4: Drain
11-5B2S
1
2013-02-04
Rev.4.0