TL071_96 Datasheet, PDF (1/14 Pages) Texas Instruments – LOW-NOISE JFET-INPUT OPERATIONAL AMPLIFIERS

TL071, TL071A, TL071B, TL072
TL072A, TL072B, TL074, TL074A, TL074B
LOW-NOISE JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS080D – SEPTEMBER 1978 – REVISED AUGUST 1996
D Low Power Consumption
D Wide Common-Mode and Differential
Voltage Ranges
D Low Input Bias and Offset Currents
D Output Short-Circuit Protection
D Low Total Harmonic Distortion
0.003% Typ
D Low Noise
V_n = 18 nV/√Hz Typ at f = 1 kHz
D High Input Impedance . . . JFET Input Stage
D Internal Frequency Compensation
D Latch-Up-Free Operation
D High Slew Rate . . . 13 V/µs Typ
D Common-Mode Input Voltage Range
Includes V_{CC +}
description
The JFET-input operational amplifiers in the TL07_ series are designed as low-noise versions of the TL08_
series amplifiers with low input bias and offset currents and fast slew rate. The low harmonic distortion and low
noise make the TL07_ series ideally suited for high-fidelity and audio preamplifier applications. Each amplifier
features JFET inputs (for high input impedance) coupled with bipolar output stages integrated on a single
monolithic chip.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized
for operation from – 40°C to 85°C. The M-suffix devices are characterized for operation over the full military
temperature range of – 55°C to 125°C.
AVAILABLE OPTIONS
PACKAGE
TA
VIOmax _SMALL
CHIP
CERAMIC CERAMIC
AT 25°C _{OUTLINE CARRIER}
DIP
DIP
PLASTIC
DIP
PLASTIC
DIP
TSSOP
PACKAGE
FLAT
PACKAGE
(D)†
(FK)
(J)
(JG)
(N)
(P)
(PW)
(W)
10 mV TL071CD
6 mV TL071ACD
—
—
—
3 mV TL071BCD
TL071CP TL071CPWLE
—
TL071ACP
—
—
TL071BCP
—
0°C to
70°C
10 mV
6 mV
3 mV
TL072CD
TL072ACD
TL072BCD
—
—
—
TL072CP TL072CPWLE
—
TL072ACP
—
—
TL072BCP
—
10 mV TL074CD
TL074CN
TL074CPWLE
6 mV TL074ACD
—
—
—
TL074ACN
—
—
—
3 mV TL074BCD
TL074BCN
—
– 40°C to
85°C
6 mV
TL071ID
TL072ID
TL074ID
—
—
—
TL071IP
—
—
TL072IP
TL074IN
—
—
—
– 55°C to
125°C
6 mV
6 mV
9 mV
TL071MFK
—
TL071MJG
—
—
—
TL072MFK
—
TL072MJG
—
TL072MP
TL074MFK TL074MJ
—
TL074MN
—
—
—
—
TL074MW
† _{The D package is available taped and reeled. Add the suffix R to the device type (e.g., TL071CDR). The PW package is only available left-ended}
taped and reeled (e.g., TL072CPWLE).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1996, Texas Instruments Incorporated
1