TJ120F06J3 Datasheet, PDF (1/7 Pages) Toshiba Semiconductor – Chopper Regulator, DC-DC Converter Applications Motor Drive Applications

TJ120F06J3
TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (U-MOSⅢ)
TJ120F06J3
Chopper Regulator, DC-DC Converter Applications
Motor Drive Applications
• Low drain-source ON resistance: R_{DS (ON)} = 5.5 mΩ (typ.)
• High forward transfer admittance: |Y_fs| = 110 S (typ.)
• Low leakage current: I_DSS = −10 μA (max) (V_DS = −60 V)
• Enhancement-model: V_th = −1.5 to −3.0 V (V_DS = −10 V, I_D = −1 mA)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Drain-source voltage
Drain-gate voltage (R_GS = 20 kΩ)
Gate-source voltage
Drain current
DC (Note 1)
Pulse (Note 1)
Drain power dissipation (Tc = 25°C)
Single pulse avalanche energy
(Note 2)
Avalanche current
Repetitive avalanche energy (Note 3)
Channel temperature (Note 4)
Storage temperature range (Note 4)
Symbol
V_DSS
V_DGR
V_GSS
I_D
I_DP
P_D
E_AS
I_AR
E_AR
T_ch
T_stg
Rating
Unit
−60
V
−60
V
±20
V
−120
A
−360
300
W
608
mJ
−120
A
30
mJ
175
°C
−55 to 175
°C
10.0 ± 0.3
9.5 ± 0.2
Unit: mm
0.4 ± 0.1
1.1
0.76 ± 0.1
1.4 ± 0.1
2.54 ± 0.25
2.35 ± 0.1
2.34 ± 0.25
123
0.4 ± 0.1
1. GATE
2. DRAIN
（HEAT SINK）
3. SOURSE
8.0
JEDEC
⎯
JEITA
⎯
TOSHIBA
2-10W1A
Weight: 1.07 g (typ.)
2
Thermal Characteristics
1
Characteristics
Symbol
Max
Unit
3
Thermal resistance, channel to case
R_{th (ch-c)}
0.5
°C/W
Note 1: Please use devises on condition that the channel temperature is below 175°C.
Note 2: V_DD = −25 V, T_ch = 25°C (Initial), L = 57 μH, R_G = 25 Ω, I_AR = −120 A
Note 3: Repetitive rating; pulse width limited by maximum channel temperature.
Note 4: The definitions of the absolute maximum channel temperature and storage temperatures are based on
AEC-Q101.
Note 5:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
This transistor is an electrostatic sensitive device. Please handle with caution
1
2009-04-17