TD62S310AFM Datasheet, PDF (1/6 Pages) Toshiba Semiconductor – TOSHIBA Bipolar Digital Integrated Circuit Silicon Monolithic

TOSHIBA Bipolar Digital Integrated Circuit
Silicon Monolithic
TD62S310AFM
1-Channel Darlington Source-Current Driver
TD62S310AFM
The TD62S310AFM is a 1-channel noninverting source-current
driver. The driver incorporates an input resistor which limits
output pull-down resistance and base current.
The driver is optimal for driving fluorescent display tubes and
LEDs. When using the driver, pay attention to the thermal
conditions.
Features
· Ultra-small HSON6 package with heat sink on rear
· Large output voltage: VOUT = −50 V (min)
· Large output current: IOUT = −100 mA (max)
· Built-in input resistor: RIN = 10 kΩ
· Input signal: High Level Active
Weight: 0.017 g (typ.)
Pin Connection (top view)
Basic Circuit Diagram
OUTPUT 1
TEST 2
V_{CC 3}
6 INPUT
5 P-GND
4 NC
INPUT
10 kW
V_CC
TEST
OUTPUT
P-GND
Note 1: Diodes shown using dotted lines are parasitic. Do not use them.
Note 2: When using the driver, connect the OUTPUT pin to the TEST pin.
Note 3: When using the driver, connect the P-GND pin to the heat sink on the rear of the package.
1
2001-12-05