TD62S011AFM Datasheet, PDF (1/8 Pages) Toshiba Semiconductor – 1-Channel Sink-Current Driver

TOSHIBA Bipolar Digital Integrated Circuit
Silicon Monolithic
TD62S011AFM
1-Channel Sink-Current Driver
TD62S011AFM
The TD62011AFM is a 1-channel noninverting sink-current
driver with a PNP transistor at the first stage and a NPN
transistor at the second stage.
The driver incorporates output clamp diodes used to clamp the
counter electromotive force which is generated when driving an
inductive load. Because the driver operates by source input
current, it is optimal for interfacing with sink-current driven
general-purpose CMOS logic ICs and microprocessors. Also it is
optimal for driving relays and LEDs. When using the driver, pay
attention to the thermal conditions
Features
· Ultra-small HSON6 package with heat sink on rear
· High output withstandard voltage: VCE (SUS) = 50 V (min)
· Large output current: IOUT = 100 mA (max)
· Built-in input resistor: RIN = 14 kΩ
· Input signal: Low Level Active
· Built-in output clamp diodes
Weight: 0.017 g (typ.)
Pin Connection (top view)
Basic Circuit Diagram
OUTPUT 1
COMMON 2
6 INPUT
5 P-GND
V_CC
INPUT
10 kW
COMMON
OUTPUT
V_{CC 3}
4 GND
P-GND
GND
Note 1: Diodes shown using dotted lines are parasitic. Do not use them.
Note 2: When using the driver, connect the P-GND pin to the GND pin.
Note 3: When using the driver, connect the P-GND pin to the heat sink on the rear of the package.
1
2001-12-05