TCS11NLU_14 Datasheet, PDF (1/6 Pages) Toshiba Semiconductor – TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TCS11NLU
TCS11NLU
Digital Output Magnetic Sensor
Features
Open-Drain Output with Inverted Logic
North-Pole Detection
UFV
Weight: 7.0 mg (typ.)
Marking
LB2
Pin Assignment (top view)
V_CC (Note 1) GND2 (Note 2)
5
4
1 23
V_{OUT GND1 NC}
(Note 2)
Function Table
Magnetic Flux
Density
≥ B_ON
≤ B_OFF
Output
Z (Note 3)
L
Note 1: A 0.47μF capacitor should be connected near the device. This
condition will not guarantee successful operation. Check the
performance thorough evaluation using the actual application to set
the condition.
Note 2: The GND1 and GND2 pins should be tied to ground.
The GND2 pin is used as a test pin during production.
Note 3: In the high-impedance state.
Start of commercial production
2008-09
1
2014-03-01