TCS11DLU Datasheet, PDF (1/6 Pages) Toshiba Semiconductor – Digital Output Magnetic Sensor

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TCS11DLU
TCS11DLU
Digital Output Magnetic Sensor
Feature
Open-Drain Output with Inverted Logic
South-Pole or North-pole Detection
Marking
LB3
UFV
Weight: 0.007 g (typ.)
Pin Assignment (top view)
V_CC (Note 1) GND2 (Note 2)
5
4
1 23
V_{OUT GND1 NC}
(Note 2)
Function Table
Magnetic Flux
Density
≥ B_ON
≤ B_OFF
Output
Z (Note 3)
L
Note 1: It is recommended to add a capacitor of about 0.1μF between Vcc and GND.
Note 2: The GND1 and GND2 pins should be tied to ground.
The GND2 pin is used as a test pin during production.
Note 3: In the high-impedance state.
1
2009-01-30