TCR2DG Datasheet, PDF (1/15 Pages) Toshiba Semiconductor – Low Noise 200 mA CMOS Low Drop-Out Regulator in ultra small package

TCR2DG series
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic
TCR2DG series
Low Noise 200 mA CMOS Low Drop-Out Regulator in ultra small package
The TCR2DG series are CMOS general-purpose single-output
voltage regulators with an on/off control input, featuring low dropout
voltage, low quiescent bias current and fast load transient response.
These voltage regulators are available in fixed output voltages
between 1.2 V and 3.6 V and capable of driving up to 200 mA. They
feature overcurrent protection and thermal shut down function.
The TCR2DG series is offered in the ultra small package WCSP4
( 0.79 mm x 0.79 mm x 0.5 mm). It has a low dropout voltage of 75
mV ( 2.5 V output, I_OUT = 100 mA) with low output noise voltage of 18
μV_rms (2.5 V output) and a load transient response of only
⊿V_OUT = ±65 mV ( I_OUT = 1 mA⇔150 mA, C_OUT =1.0 μF).
As small ceramic input and output capacitors can be used with the
Weight : 0.7 mg (typ.)
WCSP4
TCR2DG series, these devices are ideal for portable applications that require high-density board assembly such as
cellular phones.
Features
• Low Drop-out Voltage ( V_IN-V_OUT = 75 mV (typ.) at 2.5 V-output, I_OUT = 100 mA )
• Low quiescent bias current ( I_B = 45 μA (typ.) at I_OUT = 0 mA )
• Low stand-by current ( I_B(OFF) = 0.1 μA (typ.) at Stand-by mode )
• Low output noise voltage
V_NO = 22 μV_rms (typ.) at 3.0 V-output, I_OUT = 10 mA, 10 Hz < f < 100 kHz
V_NO = 18 μV_rms (typ.) at 2.5 V-output, I_OUT = 10 mA, 10 Hz < f < 100 kHz
V_NO = 14 μV_rms (typ.) at 1.2 V-output, I_OUT = 10 mA, 10 Hz < f < 100 kHz
• High ripple rejection ratio
R.R = 75 dB (typ.) at 2.5 V-output, I_OUT = 10 mA, f =1kHz
R.R = 62 dB (typ.) at 2.5 V-output, I_OUT = 10 mA, f =10kHz
R.R = 50 dB (typ.) at 2.5 V-output, I_OUT = 10 mA, f =100kHz
• Fast load transient response (⊿V_OUT = ±65 mV (typ.) at I_OUT = 1mA ⇔ 150 mA, C_OUT =1.0 μF )
• Output voltage accuracy ±1.0 %
• Over current protection
• Thermal shut down function
• Built-in inrush current reduction circuit
• Pull down connection between CONTROL and GND
• Ceramic capacitors can be used ( C_IN = 0.47μF, C_OUT =1.0 μF )
• Ultra small package, WCSP4 ( 0.79 mm x 0.79 mm x 0.50 mm )
Pin Assignment (top view)
CONTROL
V_IN
(A2)
(B2)
GND
(A1)
V_OUT
(B1)
1
Start of commercial production
2013-01
2014-03-01