TC90105FG Datasheet, PDF (1/18 Pages) Toshiba Semiconductor – Dual channel Video Decoder

Summary
TOSHIBA C-MOS Digital Integrated Circuit Silicon Monolithic
TC90105FG
Dual channel Video Decoder
TC90105FG
TC90105FG is a single chip IC that converts analog
video signals to digital video signals (ITU-R BT.601 / ITU-R
BT.656).
Additionally, the TC90105FG has a 10bit A/D converter
as an analog input interface and has 3-line Y/C separation
and multi-system color decoder functionality and a
variegated image quality processing capability.
LQFP80-P-1212-0.50F
Weight: 0.50 g (typ.)
1. Features
1. Video input: CVBS, Y/C separate signal (S-Video)
2. Adaptive multi-standard detection / sync processing
3. Synchronous playback / Standard identification
4. 2ch 10bit ADC
5. Analog AGC (Sync AGC and Peak AGC) circuit built-in
6. LPF circuit for picture signal input built-in
7. Y/C separation : 3-line YCS (NTSC/PAL)
Band Pass Filter. (SECAM)
8. Picture process Y : HVD-Enhancer, V-Enhance, LTI, Sharpness, Noise cancel, Contrast, Brightness,
Dynamic Y-gamma correction, Static Y-gamma correction
C : TOF, ACC, Color gain, CbCr offset, CTI, Noise cancel, Tint,
CMC (Color Management),C gamma correction depended on Y-gamma correction
9. Feature functions : Level aberration correction
VBI-Slicer (WSS/Video-ID/CC)
S/N detection
10. Signal output : ITU-R BT.601 / ITU-R BT.656
11. I²C-bus control
12. Regulator circuit (3.3 V input / 2.5 V output) built-in
13. Package : L-QFP 80 pin (0.50 mm pitch)
14. Power supply : 3.3 V, 2.5 V, 1.5 V
15. Operating templature : -40°C to 85°C
©2015 TOSHIBA CORPORATION
Page 1
Rev.1.00
2015/11/11