TC7WG74FK_09 Datasheet, PDF (1/9 Pages) Toshiba Semiconductor – D-Type Flip Flop with Preset and Clear

TC7WG74FU/FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC7WG74FU,TC7WG74FK
D-Type Flip Flop with Preset and Clear
Features
• High-speed
: f_MAX = 246 MHz (Typ.)
at V_CC = 3 V, CL=15pF
• High-level output current : ±8 mA (min) at V_CC = 3 V
• Operation voltage range : V_CC(opr)=0.9 to 3.6V
• 5.5-V tolerant inputs
• 3.6-V power down protection outputs
Marking
TC7WG74FU
TC7WG74FK
(SM8)
SM8
Product name
G 74
Lot No.
US8
WG
74
Absolute Maximum Ratings
(US8)
Weight
SSOP8-P-0.65 : 0.02 g (typ.)
SSOP8-P-0.50A : 0.01 g (typ.)
Pin Assignment (top view)
Characteristics
Power supply voltage
DC input voltage
DC output voltage
Input diode current
Output diode current
DC output current
DC V_CC / ground current
Power dissipation
Storage temperature
Symbol
Rating
Unit
V_CC
V_IN
V_OUT
I_IK
I_OK
I_OUT
I_CC
P_D
T_stg
−0.5 to 4.6
V
−0.5 to 7.0
V
−0.5 to 4.6 (Note 1)
V
−0.5 to V_CC + 0.5 (Note 2)
−20
mA
−20 (Note 3) mA
±25
mA
±100
mA
300 (SM8)
200 (US8)
mW
−65 to 150
°C
CK 1
D2
Q3
GND 4
D CK
PR CLR
QQ
8 V_CC
7 _PR
6 _CLR
5Q
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1:
Note 2:
Note 3:
V_CC = 0V
High or Low State. I_OUT absolute maximum rating must be observed.
V_OUT < GND
1
2009-09-18