English
Language : 

TC7763WBG Datasheet, PDF (1/28 Pages) Toshiba Semiconductor – Qi Compliant Wireless Power Receiver Controller IC
TC7763WBG
TOSHIBA CDMOS Integrated Silicon Monolithic Circuit
TC7763WBG
Qi Compliant Wireless Power Receiver Controller IC
1. Outline
The TC7763WBG is wireless power receiver (RX) IC compliant
to the Qi low power v1.1 standard of the Wireless Power
Consortium (WPC). The TC7763WBG includes a rectifier circuit,
a digital control circuit, a modulation circuit, a regulator circuit
which controls the supply voltage to the load, and a load switch
controller to detect and select an external power supply. A digital
control circuit realizes little heat generation and guarantees
voltage stabilization during load changes. The IC includes all RX
functions needed to construct a standalone wireless power system.
The integrated loadswitch driver for external loadswitch allows to
S-XFLGA28-0304-0.50-001
bypass the wireless power function when a USB or AC power source is connected to the mobile device.
2. Applications
Mobile communication devices (Smartphone, Featurephone, tablet), battery pack, mobile accessory etc.
3. Features
• Full bridge rectifier circuit
Auto switch for 3 modes
: Synchronous rectification / Diode rectification / Diode bridge
Low ON resistance
: Hi Side 45mΩ(Typ.) / Low side 30mΩ(Typ.)
Under Voltage Lockout (UVLO) / Over Voltage Detection (OVP) function
• 5V-output LDO
Maximum output current
: 1.0A
2 step Over Current Detection (OCL) function
• Qi Low Power v1.1 compliant
Foreign Object Detection (FOD) function
• External load switch driver for supply selector
• Current drive type startup function
• Under voltage lockout (UVLO) / Over voltage detection (OVLO) function
• Thermal shutdown function (TSD)
• Package
: S-XFLGA28-0304-0.50-001 (2.40mm*3.67mm*0.5mm, 0.5mm pitch)
This product has a MOS structure and is sensitive to electrostatic discharge. When handling this product, ensure that
the environment is protected against electrostatic discharge by using an earth strap, a conductive mat and an ionizer.
Ensure also that the ambient temperature and relative humidity are maintained at reasonable levels.
© 2014 TOSHIBA Corporation
1
2015-2-25