TC74VCX164245FT Datasheet, PDF (1/15 Pages) Toshiba Semiconductor – 16-Bit Dual Supply Bus Transceiver

TC74VCX164245FT
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VCX164245FT
16-Bit Dual Supply Bus Transceiver
The TC74VCX164245FT is a dual supply, advanced high-speed
CMOS 16-bit dual supply voltage interface bus transceiver
fabricated with silicon gate CMOS technology.
It is also designed with over voltage tolerant inputs and
outputs up to 3.6 V.
Designed for use as an interface between a 3.3-V or 2.5-V bus
and a 2.5-V or 1.8-V bus in mixed 3.3-V or 2.5-V/2.5-V or 1.8-V
supply systems.
The B-port interfaces with the 3.3-V or 2.5-V bus, the A-port
with the 2.5-V or 1.8-V bus.
The direction of data transmission is determined by the level of
Weight: 0.25 g (typ.)
the DIR input. The enable input ( OE ) can be used to disable the device so that the buses are effectively isolated.
All inputs are equipped with protection circuits against static discharge or transient excess voltage.
Features
· Bidirectional interface between 3.3 V and 2.5 V, 3.3 V and 1.8 V, 2.5 V and 1.8 V
· High-speed: tpd = 4.6 ns (max) (VCCB = 3.3 ± 0.3 V, VCCA = 2.5 ± 0.2 V)
tpd = 7.1 ns (max) (VCCB = 3.3 ± 0.3 V, VCCA = 1.8 ± 0.15 V)
tpd = 7.0 ns (max) (VCCB = 2.5 ± 0.2 V, VCCA = 1.8 ± 0.15 V)
· Output current: IOH/IOL = ±24 mA (min) (VCC = 3.0 V)
: IOH/IOL = ±18 mA (min) (VCC = 2.3 V)
: IOH/IOL = ±6 mA (min) (VCC = 1.65 V)
· Latch-up performance: ±300 mA
· ESD performance: Machine model > ±200 V
: Human body model > ±2000 V
· Package: TSSOP (thin shrink small outline package)
· 3.6-V tolerant function and power-down protection provided on all inputs and outputs
Note 1: Do not apply a signal to any bus pins when it is in the output mode. Damage may result.
All floating (high impedance) bus pins must have their input level fixed by means of pull-up or pull-down
resistors.
1
2001-08-30