TC74LCX273FT Datasheet, PDF (1/10 Pages) Toshiba Semiconductor – Low-Voltage Octal D-Type Flip-Flop with Clear with 5-V Tolerant Inputs and Outputs

TC74LCX273F/FW/FT
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74LCX273F,TC74LCX273FW,TC74LCX273FT
Low-Voltage Octal D-Type Flip-Flop with Clear with 5-V Tolerant Inputs and Outputs
The TC74LCX273F/FW/FT is a high-performance CMOS octal
D-type flip-flop. Designed for use in 3.3-V systems, it achieves
high-speed operation while maintaining the CMOS low-power
dissipation.
The device is designed for low-voltage (3.3 V) VCC applications,
but it could be used to interface to 5-V supply environment for
both inputs and outputs.
This 8 bit D-type flip-flop is controlled by a clock input (CK)
and a clear input (CLR). When the CLR input is low, the eight
outputs are at a low logic level.
All inputs are equipped with protection circuits against static
discharge.
Note: xxxFW (JEDEC SOP) is not available in
Japan.
TC74LCX273F
TC74LCX273FW
Features
· Low-voltage operation: VCC = 2.0 to 3.6 V
· High-speed operation: tpd = 8.5 ns (max) (VCC = 3.0 to 3.6 V)
· Output current: |IOH|/IOL = 24 mA (min) (VCC = 3.0 V)
· Latch-up performance: ±500 mA
· Available in JEDEC SOP, JEITA SOP and TSSOP
· Power-down protection is provided on all inputs and outputs
· Pin and function compatible with the 74 series
(74AC/VHC/HC/F/ALS/LS etc.) 273 type
TC74LCX273FT
Weight
SOP20-P-300-1.27: 0.22 g (typ.)
SOL20-P-300-1.27: 0.46 g (typ.)
TSSOP20-P-0044-0.65: 0.08 g (typ.)
1
2002-01-11