TC74ACT112P Datasheet, PDF (1/9 Pages) Toshiba Semiconductor – CMOS Digital Integrated Circuit Silicon Monolithic Dual J-K Flip Flop with Preset and Clear

TC74ACT112P/F/FN
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74ACT112P,TC74ACT112F,TC74ACT112FN
Dual J-K Flip Flop with Preset and Clear
The TC74ACT112 is an advanced high speed CMOS DUAL J-K
FLIP FLOP fabricated with silicon gate and double-layer metal
wiring C²MOS technology.
It achieves the high speed operation similar to equivalent
Bipolar Schottky TTL while maintaining the CMOS low power
dissipation.
This device may be used as a level converter for interfacing
TTL or NMOS to High Speed CMOS. The inputs are compatible
with TTL, NMOS and CMOS output voltage levels.
In accordance with the logic level given J and K input this
device changes state on negative going transition of the clock
pulse. CLEAR and PRESET are independent of the clock and
accomplished by a low logic level on the corresponding input.
All inputs are equipped with protection circuits against static
discharge or transient excess voltage.
Features
• High speed: f_max = 175 MHz (typ.) at V_CC = 5 V
• Low power dissipation: I_CC = 4 μA (max) at Ta = 25°C
• Compatible with TTL outputs: V_IL = 0.8 V (max)
V_IH = 2.0 V (min)
• Symmetrical output impedance: |I_OH| = I_OL = 24 mA (min)
Capability of driving 50 Ω
transmission lines.
• Balanced propagation delays: t_pLH ^∼− t_pHL
• Pin and function compatible with 74F112
Pin Assignment
Note: xxxFN (JEDEC SOP) is not available in
Japan.
TC74ACT112P
TC74ACT112F
TC74ACT112FN
Weight
DIP16-P-300-2.54A
SOP16-P-300-1.27A
SOL16-P-150-1.27
: 1.00 g (typ.)
: 0.18 g (typ.)
: 0.13 g (typ.)
1
2007-10-01