TC74AC174P_07 Datasheet, PDF (1/10 Pages) Toshiba Semiconductor – CMOS Digital Integrated Circuit Silicon Monolithic Hex D-Type Flip Flop with Clear

TC74AC174P/F/FN/FT
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74AC174P,TC74AC174F,TC74AC174FN,TC74AC174FT
Hex D-Type Flip Flop with Clear
The TC74AC174 is an advanced high speed CMOS HEX
D-TYPE FLIP FLOP fabricated with silicon gate and
double-layer metal wiring C²MOS technology.
It achieves the high speed operation similar to equivalent
Bipolar Schottky TTL while maintaining the CMOS low power
dissipation.
Information signals applied to D inputs are transferred to the
Q output on the positive going edge of the clock pulse.
When the CLR input is held low, the Q output are in the low
logic level independent of the other inputs.
All inputs are equipped with protection circuits against static
discharge or transient excess voltage.
Features
• High speed: f_max = 180 MHz (typ.) at V_CC = 5 V
• Low power dissipation: I_CC = 8 μA (max) at Ta = 25°C
• High noise immunity: V_NIH = V_NIL = 28% V_CC (min)
• Symmetrical output impedance: |I_OH| = I_OL = 24 mA (min)
Capability of driving 50 Ω
transmission lines.
• Balanced propagation delays: t_pLH ^∼− t_pHL
• Wide operating voltage range: V_{CC (opr)} = 2 to 5.5 V
• Pin and function compatible with 74F174
Note: xxxFN (JEDEC SOP) is not available in
Japan.
TC74AC174P
TC74AC174F
TC74AC174FN
TC74AC174FT
Weight
DIP16-P-300-2.54A
SOP16-P-300-1.27A
SOL16-P-150-1.27
TSSOP16-P-0044-0.65A
: 1.00 g (typ.)
: 0.18 g (typ.)
: 0.13 g (typ.)
: 0.06 g (typ.)
1
2007-10-01