TB67S213FTAG Datasheet, PDF (1/23 Pages) Toshiba Semiconductor – PWM method PHASE-IN Bipolar stepping motor driver

TB67S213FTAG
TOSHIBA BiCD Integrated Circuit Silicon Monolithic
TB67S213FTAG
PWM method PHASE-IN Bipolar stepping motor driver
FTAG
The TB67S213FTAG is a pwm method phase signal controlled
motor driver for two-phase bipolar stepping motor.
Using the BiCD process, the TB67S213FTAG is rated at
40V/2.5A.(Absolute maximum ratings)
Also, with the built-in VCC regulator, the TB67S213FTAG
can be operated with a single motor power(VM) supply.
P-WQFN36-0606-0.50-002
Features
Weight:0.14(g)
・The TB67S213FTAG can operate a single bipolar stepping motor.
・PWM method current feedback control.
・Operational in Full, Half, and Quarter step resolutions.
・Uses low on-resistance MOSFETs for output stage.
・High voltage and large current. (For specification, please refer to the absolute maximum ratings
and operation ranges.)
・Error detection circuits (Thermal Shutdown(TSD), Over current shutdown(ISD), and Power-on reset(POR))
・The built-in VCC regulator allows the TB67S213FTAG to operate with a single VM power supply.
・Customizable PWM chopping frequency using the external components (resistance/condenser).
・Package:
TB67S213FTAG: P-WQFN36-0606-0.50-002
Note) Please be careful about thermal conditions during use.
1
2013-08-19
Ver.1.02