|
TB67S105FTG Datasheet, PDF (1/30 Pages) Toshiba Semiconductor – 8bit Serial controlled bipolar stepping motor driver | |||
|
TB67S105FTG
Toshiba BiCD process integrated circuit silicon monolithic
TB67S105FTG
8bit Serial controlled bipolar stepping motor driver
The TB67S105FTG is a two phase bipolar stepping motor driver
using a PWM chopper, controlled by 8 bit serial.
Fabricated by the BiCD process, the TB67S105FTG is rated
at 50V/3.0A.
The internal voltage regulator allows to control the device
with a single VM power supply.
FTG
P-WQFN48-0707-0.50-003
Weight: 0.1 g (Typ.)
Features
ã»BiCD process integrated monolithic IC.
ã»Capable of controlling one bipolar stepping motor.
ã»PWM controlled constant-current drive.
ã»Built-in serial-parallel convert circuit (8bit shift register)
ã»3-line (Data, Clock, Latch) serial output function for cascade connection
ã»Allows full, half step operation
ã»4 bit (16 steps) adjustable torque function (TRQ1,TRQ2,TRQ3,TRQ4).
ã»Low on-resistance (High + Low side=0.6Ω(typ.)) MOSFET output stage.
ã»High voltage and current (for specification, please refer to the absolute maximum ratings and operation
ranges).
ã»Built-in error detection circuits (Thermal shutdown (TSD), over current shutdown (ISD), and power on
reset(POR)).
ã»Built-in VCC regulator for internal use.
ã»Chopping frequency of a motor can be customized by external resistance and condenser.
ã»Package type: P-WQFN48-0707-0.50-003
Note) Please be careful about thermal conditions during use.
©2014 TOSHIBA CORPORATION
1
2014-10-20
|
▷ |