|
TB6561FG Datasheet, PDF (1/14 Pages) Toshiba Semiconductor – Dual Full-Bridge Driver IC | |||
|
TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic
TB6561FG
TB6561FG
Dual Full-Bridge Driver IC
The TB6561FG is a dual bridge driver IC for DC brush motor that
contains MOS transistors in an output stage.
By using low ON-resistance MOS transistors and PWM current
control circuitry, the driver achieves high efficiency.
TB6561FG
Features
⢠Power supply voltage: 40 V (max)
⢠Output current: 1.5 A (max)
⢠Low ON-resistance: 1.5 ⦠(upper and lower transistors/typ.)
⢠Direct PWM current control system
⢠Power-saving function
⢠Forward/reverse/short brake/stop modes
⢠Over-current protection: Ilim = 2.5A (typ.)
⢠Thermal shutdown
⢠Package: SSOP30-P-375-1.00
SSOP30-P-375-1.00
Weightɿ0.63gʢtyp.ʣ
The TB6561FG is a Pb-free product.
The following conditions apply to solderability:
*Solderability
1. Use of Sn-37Pb solder bath
*solder bath temperature = 230ºC
*dipping time = 5 seconds
*number of times = once
*use of R-type flux
2. Use of Sn-3.0Ag-0.5Cu solder bath
*solder bath temperature = 245ºC
*dipping time = 5 seconds
*number of times = once
*use of R-type flux
1
2007-5-11
|
▷ |