TA8220HQ_06 Datasheet, PDF (1/15 Pages) Toshiba Semiconductor – 30W BTL × 2ch Audio Power Amplifier

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA8220HQ
TA8220HQ
30W BTL × 2ch Audio Power Amplifier
The thermal resistance θj−T of TA8220HQ package designed for
low thermal resistance, has high efficiency of heat radiation.
The temperature rise of chip can be reduced, and the influence
from the degradation of the features due to the temperature rise
at the high output can also be reduced.
This stereo audio power IC, designed for car audio use, has two
built−in channels to reduce the characteristic difference between
L and R channels. It also contains output short detection circuit,
output clip detection and various kind of protection.
Features
Weight: 9.8g (typ.)
• Low thermal resistance: θj−T = 1.5°C / W (infinite heat sink)
• High power: POUT (1) = 30W (typ.) / channel
(VCC = 14.4V, f = 1kHz, THD = 10%, RL = 2Ω)
: POUT (2) = 26W (typ.) / channel
(VCC = 13.2V, f = 1kHz, THD = 10%, RL = 2Ω)
: POUT (3) = 19W (typ.) / channel
(VCC = 13.2V, f = 1kHz, THD = 10%, RL = 4Ω)
• Low distortion ratio: THD = 0.04% (typ.)
(VCC = 13.2V, f = 1kHz, POUT = 1W, RL = 4Ω, GV = 50dB)
• Low noise: VNO = 0.30mVrms (typ.)
(VCC = 13.2V, RL = 4Ω, GV = 50dB, Rg = 0Ω, BW = 20Hz~20kHz)
• Built−in stand−by function (with (4)pin set at low, power is turned off.): ISB = 1µA (typ.)
• Built−in output short detection circuit ((9)pin: Open collector)
• Built−in output clip detection circuit ((1)pin: Open collector)
• Built−in various protection circuits
Protection circuits: Thermal shut down, Over voltage, Out→VCC short, Out→GND short and Out−Out short.
• Operating supply voltage: VCC = 9~18V
1
2006-04-28