TA8210AHQ Datasheet, PDF (1/14 Pages) Toshiba Semiconductor – 20W BTL × 2ch Audio Power Amplifier

TA8210AHQ/ALQ
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA8210AHQ,TA8210ALQ
20W BTL × 2ch Audio Power Amplifier
The thermal resistance θj−T of TA8210AHQ, TA8210ALQ
package designed for low thermal resistance, has a high
efficiency of heat radiation.
The temperature rise of chip can be reduced, and the influence
from the degradation of the features due to the temperature rise
at the high output can also be reduced.
This stereo audio power IC, designed for car audio use, has two
built−in channels to reduce the characteristic difference between
L and R channels.
In addition, the functions of stand−by and muting, and a variety
of protection circuits are involved.
TA8210AHQ
TA8210ALQ
Features
• Low thermal resistance
: θj−T = 1.5°C / W (infinite heat sink)
• High power
: POUT (1) = 22W (typ.) / channel
Weight
HZIP17-P-2.00: 9.8g (typ.)
HSIP17-P-2.00: 9.8g (typ.)
(VCC = 14.4V, f = 1kHz, THD = 10%, RL = 4Ω)
POUT (2) = 19W (typ.) / channel
(VCC = 13.2V, f = 1kHz, THD = 10%, RL = 4Ω)
• Low distortion ratio: THD = 0.04% (typ.) (VCC = 13.2V, f = 1kHz, POUT = 1W, RL = 4Ω, GV = 50dB)
• Low noise: VNO = 0.30mVrms (typ.) (VCC = 13.2V, RL = 4Ω, GV 50dB, Rg = 0Ω, BW = 20Hz~20kHz)
• Built−in stand−by function (with pin(4) set at low, power is turned off.): ISB = 1µA (typ.)
• Built−in muting function (with pin(1) set at low, power is turned off.): V (mute) = 1V (typ.)
• Built−in various protection circuits
Protection circuits: Thermal shut down, Over voltage, Out→VCC short, Out→GND short and Out−Out short.
• Operating supply voltage: VCC = 9~18V
1
2006-04-28