English
Language : 

TA4401CT Datasheet, PDF (1/11 Pages) Toshiba Semiconductor – 1.9 ~ 2.5 GHz Band Power Amplifier
TOSHIBA Bipolar Linear Integrated Circuit SiGe Monolithic
TA4401CT
TA4401CT
1.9 ~ 2.5 GHz Band Power Amplifier
PHS, Digital Cordless Telecommunication Application
Wireless LAN IEEE802.11b/g Application
Bluetooth Class 1 Application
Features
• Single voltage operation : VCC = 3.0 V (typ.) for PHS
• Large output power
: VCC = 3.3 V (typ.) for IEEE802.11g
: Pout = 22.5 dBmW (min.) for PHS
Weight: 0.012 g (typ.)
: Pout = 18 dBmW (min.) for IEEE802.11g
• High power gain
: Gp = 35 dB (typ.) for PHS
: Gp = 27.5 dB (typ.) for IEEE802.11g
• Nano-amp shutdown mode: ICC_OFF = 20 nA (typ.) when VCON = 0 V
• Small package
: CST16 (CSON16-P-0303-0.50) package
(2.9 mm × 2.9 mm × 0.48 mm)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Supply voltage
Input power
Power dissipation
Operating temperature range
Storage temperature range
VCC (Note 1)
VCON (Note 2)
Pin
Pd (Note 3)
Topr
Tstg
3.6
3.6
–3
1
–40 to +85
–55 to +150
V
V
dBmW
W
˚C
˚C
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: VCC = VCC1 = VCC2 = VCC3
Note 2: VCON = VCON12 = VCON3
Note 3: When mounted on 30 mm × 35 mm × 0.4 mm FR4 substrate at Ta = 25°C (double-sided substrate: the
reverse side is the ground connection.)
Caution
This device is sensitive to electrostatic discharge. When handling this product, ensure that the environment is
protected against electrostatic discharge by using an earth strap, a conductive mat and an ionizer.
1
2007-11-01