TA2123AF Datasheet, PDF (1/20 Pages) Toshiba Semiconductor – 1.5V Stereo Headphone Amplifier

TOSHIBA Bipolar Integrated Circuit Silicon Monolithic
TA2123AF
1.5V Stereo Headphone Amplifier
TA2123AF
The TA2123AF is the system amplifier IC which is developed
for playback stereo headphone equipments. It is built in dual
auto−reverse preamplifiers, dual power amplifiers with bass /
treble boost function, AMS (automatic music sensor) function,
beep function, AGC for power amplifier etc.
Features
· Power amplifier stage
· In case of output coupling type, the supply current
decreases.
(built−in center amplifier switch)
Weight: 0.17g (typ.)
· Built−in bass boost function
· Built−in treble boost function
· Built−in power amplifier muting function
· Built−in input terminal for beep signal
· Built−in input capacitor for reducing buzz noise
· GV = 24dB (typ.)
· Built−in AGC circuit (in case of boost mode, this circuit operates.)
· Low supply current
(VCC = 1.3V, f = 1kHz, RL = 32Ω, Ta = 25°C, typ.)
No Signal 0.1mW × 2 0.5mW × 2
Output coupling type
OCL type
1.5mA
2.2mA
3.0mA
4.9mA
5.0mA
8.6mA
· Preamplifier stage
· Auto-reverse compatible
· Built-in input capacitor for reducing buzz noise
· Input coupling condensor-less
· Built-in metal mode drivers
· Preamplifier muting function
· Built-in ripple filter circuit
· Built-in AMS (automatic music sensor) function (mixer amplifier and level comparator)
· Built-in power switch
· Operating supply voltage range (Ta = 25°C)
VCC (opr) = 0.95~2.2V
1
2002-10-30