SSM6P41FE Datasheet, PDF (1/5 Pages) Toshiba Semiconductor – Power Management Switches

SSM6P41FE
TOSHIBA Field Effect Transistor Silicon P Channel MOS Type
SSM6P41FE
○ Power Management Switches
• 1.5-V drive
• Low ON-resistance : R_on = 1.04 Ω (max) (@V_GS = -1.5 V)
: R_on = 0.67 Ω (max) (@V_GS = -1.8 V)
: R_on = 0.44 Ω (max) (@V_GS = -2.5 V)
: R_on = 0.30 Ω (max) (@V_GS = -4.5 V)
Absolute Maximum Ratings (Ta = 25 °C) (Q1, Q2 Common)
Characteristic
Symbol
Rating
Unit
Drain-source voltage
Gate-source voltage
Drain current
DC
Pulse
Drain power dissipation
Channel temperature
Storage temperature range
V_DSS
-20
V
V_GSS
±8
V
I_D
-720
mA
I_DP
-1440
P_D (Note1)
150
mW
T_ch
150
°C
T_stg
−55 to 150
°C
Note: Using continuously under heavy loads (e.g. the application of
high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual
reliability data (i.e. reliability test report and estimated failure rate,
etc).
Note 1: Total rating
Mounted on an FR4 board
(25.4 mm × 25.4 mm × 1.6 mm, Cu Pad: 0.135 mm² × 6)
1.6±0.05
1.2±0.05
Unit: mm
1
6
2
5
3
4
ES6
1.Source1
2.Gate1
3.Drain2
4.Source2
5.Gate2
6.Drain1
JEDEC
―
JEITA
―
TOSHIBA
2-2N1D
Weight: 3.0 mg (typ.)
Marking
6
5
4
Equivalent Circuit (top view)
6
5
4
PP3
Q1
Q2
1
2
3
Handling Precaution
1
2
3
When handling individual devices (which are not yet mounted on a circuit board), ensure that the environment is
protected against static electricity. Operators should wear anti-static clothing, and containers and other objects that come
into direct contact with devices should be made of anti-static materials.
Precaution
Let V_th be the voltage applied between gate and source that causes the drain current (I_D) to be low (-1mA for the
SSM6P41FE). Then, for normal switching operation, V_GS(on) must be higher than V_th, and V_GS(off) must be lower than
V_th. This relationship can be expressed as: V_GS(off) < V_th < V_GS(on).
Take this into consideration when using the device.
1
2009-06-25