RN1102MFVTPL3 Datasheet, PDF (1/8 Pages) Toshiba Semiconductor – Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications

RN1101MFV∼RN1106MFV
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process)
RN1101MFV,RN1102MFV,RN1103MFV
RN1104MFV,RN1105MFV,RN1106MFV
Switching, Inverter Circuit, Interface Circuit and
Driver Circuit Applications
z Ultra-small package, suited to very high density mounting
z Incorporating a bias resistor into the transistor reduces the number of parts,
so enabling the manufacture of ever more compact equipment and
lowering assembly cost.
z A wide range of resistor values is available for use in various circuits.
z Complementary to the RN2101MFV to RN2106MFV
Unit: mm
1.2 ± 0.05
0.80 ± 0.05
1
1
Equivalent Circuit and Bias Resistor Values
3
2
Type No.
RN1101MFV
RN1102MFV
RN1103MFV
RN1104MFV
RN1105MFV
RN1106MFV
R1 (kΩ)
4.7
10
22
47
2.2
4.7
R2 (kΩ)
4.7
10
22
47
47
47
Absolute Maximum Ratings (Ta = 25°C)
VESM
1. BASE
2. EMITTER
3. COLLECTOR
JEDEC
―
JEITA
―
TOSHIBA
2-1L1A
Weight: 1.5 mg (typ.)
Characteristic
Symbol
Rating
Unit
Collector-base voltage
RN1101MFV to 1106MFV
V_CBO
50
V
Collector-emitter voltage
V_CEO
50
V
RN1101MFV to 1104MFV
10
Emitter-base voltage
V_EBO
V
RN1105MFV, 1106MFV
5
Collector current
I_C
100
mA
Collector power dissipation _{RN1101MFV to 1106MFV} P_C(Note 1)
150
mW
Junction temperature
T_j
150
°C
Storage temperature range
T_stg
−55 to 150
°C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant
change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the
operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: Mounted on an FR4 board (25.4 mm × 25.4 mm × 1.6 mm)
Pad Dimension（Reference）
0.5
0.45
unit：mm
1.15
0.4
0.45
0.4 0.4
1
2010-03-07